FREE SHIPPING TO ANY FFL DEALER  |  15% OFF WITH CRYPTOCURRENCY PAYMENT
Login / Register Cart Contact

A Better-Fitting Stock for Your Remington 1100

A Remington 1100 can feel entirely different when its stock suits your shoulder, cheek, and shooting stance. The right length of pull, comb height, cast, and recoil pad position help the shotgun mount naturally, keep your eye aligned with the rib, and reduce the need to force your head into place.

For Australian owners, the best upgrade is a measured fitment carried out with attention to local firearms rules. A replacement stock may look like a simple furniture change, but it can affect handling, storage, transport, and the way the shotgun sits in the shoulder pocket.

Why Stock Fit Matters

A factory stock is designed around an average shooter. Your body may need something different, especially if you have a longer or shorter reach, a broader chest, or a preferred shooting position. Length of pull is the distance from the trigger face to the centre of the recoil pad, and even a small adjustment can change comfort and control.

Drop at comb and drop at heel also deserve attention. Too much drop can place your eye below the rib, while too little may make the gun feel high and awkward. A comb that is too low often encourages the shooter to lift their head during the mount, which can make consistent cheek contact difficult.

Cast describes the stock’s sideways offset. A right-handed shooter may benefit from cast-off, while a left-handed shooter may need cast-on. This should be assessed with the shotgun unloaded and handled by a qualified professional, since an apparently minor change can influence how the gun aligns with your face and shoulder.

Check Australian Requirements First

Before ordering a stock, speak with a licensed firearms dealer or accredited gunsmith in your state or territory. Australian requirements differ between jurisdictions, and the relevant rules can cover firearm registration, alterations, storage, transport, and who may perform work on a controlled firearm. A dealer can also advise whether the specific replacement part needs to come through a permitted channel.

The Remington 1100 remains a popular semi-automatic shotgun, but its classification and permitted use depend on the model, configuration, licence category, and local law. NSW, Victoria, Queensland, Western Australia, South Australia, Tasmania, the ACT, and the Northern Territory each have their own administrative processes. Confirm the position before placing an overseas order or sending a receiver anywhere.

If you are comparing models or replacement options, the store’s shotgun catalogue can help you identify compatible Remington patterns. Australian buyers should still confirm international availability, import approval, and dealer handling rather than assuming a US-based listing can be shipped directly to a home address.

Measure Your Current Setup

Start with the unloaded shotgun secured in a safe, stable location. Record the existing length of pull from the trigger face to the centre of the recoil pad. Then note where your nose sits in relation to the thumb and your eye sits in relation to the rib when the gun is mounted naturally.

A practical fit check involves mounting the shotgun with your eyes closed, opening them, and observing whether your dominant eye is aligned along the rib without stretching your neck or lifting your cheek. Repeat this several times. If the position changes from mount to mount, the issue may be technique, stock dimensions, or both.

Pay attention to the recoil pad’s angle and shape. A pad that catches on clothing can slow the mount, while one that is too narrow may concentrate recoil. Australian shooters using heavier field loads should also consider how the stock behaves in wet conditions, hot Queensland weather, or dusty inland storage environments.

Choose The Right Replacement Style

A fixed wooden stock can preserve the classic appearance of an 1100 and may be shaped by a gunsmith for a precise personal fit. Walnut is attractive and can be repaired or refinished, but it needs sensible care. Laminated timber offers a different balance of durability and appearance, while synthetic stocks generally tolerate rain, mud, and hard field use with less concern.

Adjustable stocks allow changes to length of pull, comb height, and sometimes cast. They can be useful when several shooters share a shotgun or when a shooter is still refining their stance. The extra hardware may add weight and change the balance, so a stock that looks versatile on a product page may not feel right in the hands.

Avoid choosing based only on colour or advertised “universal” compatibility. Remington 1100 variants, production periods, and aftermarket components can differ. Confirm the stock’s receiver fit, action compatibility, fastener arrangement, safety clearance, and suitability for your exact gauge and model with the seller or gunsmith.

Have The Work Completed Properly

Replacing a stock involves more than removing one component and tightening another. The fit at the receiver must be even and secure, with no cracking, movement, interference, or exposed gap. Fasteners should be tightened to the maker’s specification, using the correct tools and procedures rather than guesswork.

A licensed Australian gunsmith can check whether the new stock contacts the receiver correctly and whether the safety, trigger access, action movement, and loading controls remain unobstructed. They can also shorten a stock, install a recoil pad, or adjust the comb in a controlled way. Avoid cutting material until you have tested the dimensions.

Keep all work documented with your dealer or gunsmith, particularly if the modification changes the shotgun’s configuration. Store the firearm in accordance with your state or territory’s safe-storage rules, and transport it unloaded and secured as required. A better stock is no benefit if the installation creates a compliance problem.

Test The Fit At A Suitable Range

After installation, begin with a professional inspection and a conservative session at an approved range or lawful shooting location. Follow the range officer’s directions, use suitable ammunition, and keep the muzzle pointed in a safe direction whenever the shotgun is handled. Stop immediately if the stock shifts, cracks, binds, or causes unusual discomfort.

Use a few deliberate mounts before firing. Check whether your cheek contacts the same place each time, whether the recoil pad stays seated, and whether the shotgun comes to the shoulder without snagging on a vest or jacket. A clay-target club near Melbourne, Brisbane, Adelaide, Perth, or another regional centre can be a useful place to obtain practical fit feedback from experienced members.

For a broader look at Remington platforms used in precision settings, the guide to long-range Remington rifles covers a different category of firearm, but its discussion of stability and shooter interface reinforces an important point: consistent contact matters more than appearance.

Keep A Simple Fitment Checklist

Record your measurements before shopping, then compare them with the replacement stock’s specifications. Keep the notes with your firearm records so a gunsmith can understand what changed and why.

Measurements worth recording:

After fitting, inspect the shotgun before every session. Look for movement at the stock, damage around the receiver, loose hardware, and any change in safety or trigger access. These checks are especially important after travel on Australian roads or storage through humid coastal weather.

Post-installation checks:

If an order needs to be changed before dispatch, review the retailer’s cancellation policy promptly, since firearm and accessory orders may follow different procedures and time limits. Do not assume a cancellation will be possible after processing or transfer arrangements have begun.

A well-fitted Remington 1100 should mount smoothly, place your eye in a repeatable position, and remain comfortable through a full session. Work with an Australian licensed dealer or gunsmith, verify the rules that apply where you live, and choose the stock only after its dimensions and compatibility have been checked.